English 
German JL Wiki
4.2On-site service, transport and assembly
- Planning and implementation of heavy load transports by road, rail and waterway
- Assembly teams consisting of site managers, engineers, technicians, locksmiths, lead solderers and welders with certificates of competence and experience from projects worldwide
- Assembly, commissioning, maintenance, repair, general overhaul and dismantling.
- Preparation of inspection reports, as part of the maintenance planning of facilities
- Remote assistance e.g. through augmented reality as support for assembly processes
- Installation, service and regular inspection of door/gate systems by experts
4.1Design & Engineering
- Calculations, material selection and CAD-supported designs
- CAD Tools
- Consideration of all stresses due to mechanical and chemical loads incl. statics and earthquake safety calculations
3.1Anodes for metal extraction (zinc, copper, nickel)
- Lead-silver anodes (PbAg) for electrolytic zinc extraction
- Lead-calcium anodes (PbCa) for the electrowinning of copper
- Anodes for special applications
- Anode "full-service recycling" - from new and scrap metal by recycling anodes
- Cathodes
- Organisation of the project logistics
- Practical research and application development
- On-site support and assistance with process optimisation
2.7Evaporator plants for the treatment of radioactive liquids
- Plants for the treatment of waste water with low radioactive contamination. The principle is based on the separation of the wastewater by a distillation process. Non-volatile substances (salts / solids) - and thus also the bound radioactivity - are retained in the concentrate, while the pure water content is distilled off by purifying the steam produced.
2.6Radiation protection containers (MAW and LAW)
- Tank containers for radioactive liquids
- Special containers for the transport of radioactive liquids
- Approvals according to the highest international safety guidelines for rail and road transport for hazardous material class 7 according to ADR/RID Possible container equipment
- Calculation and design of container and shielding thickness according to the load to be transported
- For PLC-controlled filling, there are the variants vacuum/compressed air or pump systems. The electronic control is integrated in the container.
- Vacuum pumps, compressors or exhaust air filters on-board.
- Additional collecting trays for condensate
- Tank container and fairing coated with decontamination paint
- Tanks with thermal insulation or integrated heating system
- Safety concept with high-security tank and double-walled shell or a steel-lead sandwich shell
- automatic control concept and/or leak detection system.
- Automatic closure of the tank valves in case of malfunctions
- Walk-on platform for service and maintenance work
2.5Door and gate systems in radiation protection
- Shielding doors and gates (manual or automatic) for radiation protection rooms and radiation protection chambers with:
- Programmable logic controller and frequency converter for smooth start-up, acceleration and gentle deceleration in the end position
- Control-programmed, infinitely adjustable opening and closing cycles for optimum treatment frequency
- Integration of door systems into the operating concept of the complete installation
- Emergency opening system in case of power failure with manual opening device
- Design of the system components for low-wear operation
- Monitoring of the operating states via remote diagnosis
- Assembly, service and regular inspection by experts
2.4Radiation protection in materials testing
- Radiation protection housing
- Detector shielding (protection from natural radiation for high-energy physics detectors)
- Spec. large-format and thick-walled shielding.
- Shielding of beam tubes in synchrotrons (beam-line shielding)
2.3Radiation protection in medical technology, nuclear medicine and the pharmaceutical industry
- complete room shielding.
- Ready-to-install components for CT and X-ray systems
- Door and gate systems
- Laboratory equipment
- Radiation protection accessories (e.g. safes, lead bricks, lead sheets, lead foils, lead mats, transport containers)
2.2Radiation protection in nuclear technology
- Transport container
- Dangerous goods container
- Radiation protection booths
- Radiation protection housing
- Radionuclide container
- Lead chambers
- Type A container for isotope transport and handling
- Technical semi-finished products (rolled lead, lead profiles, lead granulate, stampings, pipes and wires)
- Completely ready-to-install components for CT and X-ray systems
- Shielding walls
- Shielding components for hot cell
- Lead castings according to the MSC process are poured out free of pores and voids
- Double-walled shields (e.g. transport containers, radiation source shields, shielding shields) made of black or stainless steel, copper or aluminium
- Self-adhesive lead foils (rolls or blanks), also tin-coated
- Special profiles and sandwich joints
- Lead inserts with wall thicknesses of up to 120 mm for nuclear transport and storage containers, e.g. for the final disposal of LAW/ MAW waste
- Manufacture, delivery, assembly, installation as a turnkey solution
2.1Lead and tin semi-finished products
- Lead sheets up to 4.20 meters wide
- Rolled lead, lead profiles, lead granulate, stampings, pipes and wires
- Tin tubes and sheets for organ building
- Tin sheets, tin granules, tin rounds for lapping
- Finely rolled tin sheets with perfect surface finish in thicknesses down to 0.5 mm
1.7Dangerous goods containers and packaging
- 20' ISO container for transporting hazardous goods, e.g. for transporting bromine
- Hazardous goods packaging and small containers with 140, 450 and 1000l capacity for the transport of hydrofluoric acid and bromine
- Transport drums for hazardous goods
1.6Star tube cooler
- Star tube coolers / tube bundle condensers as components of gas purification plants for the recovery of zinc and copper, molybdenum with extruded inner fins
1.5Wet electrostatic precipitators and spare parts
- Complete wet electrostatic precipitators (WESP) for efficient emission control of submicron particles, heavy metals, acid and oil mists.
- Components for gas purification plants in the production of zinc and copper, sulphuric acid, titanium dioxide, ultramarine blue, viscose, methyl acrylate
- Electrostatic filter housing
- Precipitation and emission electrodes of electrostatic precipitators
- Dry insulation
- Inspection, repair and general overhaul of old systems
1.4Anodes for metal treatment
Anodes for
- the pickling of stainless steels,
- the galvanising and chromium-plating of carbon steels,
- the production of copper foil,
- the hard chrome plating
- other galvanic processes
1.3Lead linings
- Linings of electrolysis cells for the extraction of copper or zinc
- Storage tanks with low temperature and pressure stresses and drip pans
- Approvable multi-wall containers
1.2Autoclaves and reactors
- Vessels and components for the hydrometallurgical extraction of gold, nickel, molybdenum
- Storage tanks for sulphuric acid, process liquids and residues
- Containers up to a diameter of 5.6 metres with unit weights of up to 130 tonnes
1.1Apparatus and solid lead constructions
- Washing and cooling towers
- Evaporator and cooler
- Reaction vessel
- Construction site production also of large segmented tanks in homogeneous lead lined design
- Mechanically machined and lead soldered parts and plant components for the chemical and metallurgical industry
- Cooling and heating coils
- Anodes made of solid lead or lead alloys for use at low temperatures
- Apparatus for chemical applications e.g. for the production of methyl acrylate, viscose, sulphuric acid
1. apparatus engineering
1.1 Apparatus and solid lead constructions
- Washing and cooling towers
- Evaporator and cooler
- Reaction vessel
- Construction site production also of large segmented tanks in homogeneous lead lined design
- Mechanically machined and lead soldered parts and plant components for the chemical and metallurgical industry
- Cooling and heating coils
- Anodes made of solid lead or lead alloys for use at low temperatures
- Apparatus for chemical applications e.g. for the production of methyl acrylate, viscose, sulphuric acid
1.2 Autoclaves and reactors
- Vessels and components for the hydrometallurgical extraction of gold, nickel, molybdenum
- Storage tanks for sulphuric acid, process liquids and residues
- Containers up to a diameter of 5.6 metres with unit weights of up to 130 tonnes
1.3. Linings with lead
- Linings of electrolysis cells for the extraction of copper or zinc
- Storage tanks with low temperature and pressure stresses and drip pans
- Approvable multi-wall containers
1.4. Anodes for metal treatment
Anodes for
- the pickling of stainless steels,
- the galvanising and chromium-plating of carbon steels,
- the production of copper foil,
- the hard chrome plating
- other galvanic processes
1.5 Wet electrostatic precipitators and spare parts
- Complete wet electrostatic precipitators (WESP) for efficient emission control of submicron particles, heavy metals, acid and oil mists.
- Components for gas purification plants in the production of zinc and copper, sulphuric acid, titanium dioxide, ultramarine blue, viscose, methyl acrylate
- Electrostatic filter housing
- Precipitation and emission electrodes of electrostatic precipitators
- Dry insulation
- Inspection, repair and general overhaul of old systems
1.6 Star tube cooler
- Star tube coolers / tube bundle condensers as components of gas purification plants for the recovery of zinc and copper, molybdenum with extruded inner fins
1.7 Dangerous Goods Containers and Packagings
- 20′-ISO container for transporting hazardous goods, e.g. for transporting bromine
- Hazardous goods packaging and small containers with 140, 450 and 1000l capacity for the transport of hydrofluoric acid and bromine
- Transport drums for hazardous goods
2. Radiation protection
2.1 Semi-finished lead and tin products
- Lead sheets up to 4.20 meters wide
- Rolled lead, lead profiles, lead granulate, stampings, pipes and wires
- Tin tubes and sheets for organ building
- Tin sheets, tin granules, tin rounds for lapping
- Finely rolled tin sheets with perfect surface finish in thicknesses down to 0.5 mm
2.2 Radiation protection in nuclear technology
- Transport container
- Dangerous goods container
- Radiation protection booths
- Radiation protection housing
- Radionuclide container
- Lead chambers
- Type A container for isotope transport and handling
- Technical semi-finished products (rolled lead, lead profiles, lead granulate, stampings, pipes and wires)
- Completely ready-to-install components for CT and X-ray systems
- Shielding walls
- Shielding components for hot cell
- Lead castings according to the MSC process are poured out free of pores and voids
- Double-walled shields (e.g. transport containers, radiation source shields, shielding shields) made of black or stainless steel, copper or aluminium
- Self-adhesive lead foils (rolls or blanks), also tin-coated
- Special profiles and sandwich joints
- Lead inserts with wall thicknesses of up to 120 mm for nuclear transport and storage containers, e.g. for the final disposal of LAW/ MAW waste
- Manufacture, delivery, assembly, installation as a turnkey solution
2.3 Radiation protection in medical technology, nuclear medicine and the pharmaceutical industry
- complete room shielding.
- Ready-to-install components for CT and X-ray systems
- Door and gate systems
- Laboratory equipment
- Radiation protection accessories (e.g. safes, lead bricks, lead sheets, lead foils, lead mats, transport containers)
2. Radiation protection
2.1 Semi-finished lead and tin products
- Lead sheets up to 4.20 meters wide
- Rolled lead, lead profiles, lead granulate, stampings, pipes and wires
- Tin tubes and sheets for organ building
- Tin sheets, tin granules, tin rounds for lapping
- Finely rolled tin sheets with perfect surface finish in thicknesses down to 0.5 mm
2.2 Radiation protection in nuclear technology
- Transport container
- Dangerous goods container
- Radiation protection booths
- Radiation protection housing
- Radionuclide container
- Lead chambers
- Type A container for isotope transport and handling
- Technical semi-finished products (rolled lead, lead profiles, lead granulate, stampings, pipes and wires)
- Completely ready-to-install components for CT and X-ray systems
- Shielding walls
- Shielding components for hot cell
- Lead castings according to the MSC process are poured out free of pores and voids
- Double-walled shields (e.g. transport containers, radiation source shields, shielding shields) made of black or stainless steel, copper or aluminium
- Self-adhesive lead foils (rolls or blanks), also tin-coated
- Special profiles and sandwich joints
- Lead inserts with wall thicknesses of up to 120 mm for nuclear transport and storage containers, e.g. for the final disposal of LAW/ MAW waste
- Manufacture, delivery, assembly, installation as a turnkey solution
2.3 Radiation protection in medical technology, nuclear medicine and the pharmaceutical industry
- complete room shielding.
- Ready-to-install components for CT and X-ray systems
- Door and gate systems
- Laboratory equipment
- Radiation protection accessories (e.g. safes, lead bricks, lead sheets, lead foils, lead mats, transport containers)
2.4 Radiation protection in materials testing
- Radiation protection housing
- Detector shielding (protection from natural radiation for high-energy physics detectors)
- Spec. large-format and thick-walled shielding.
- Shielding of beam tubes in synchrotrons (beam-line shielding)
2.5 Door and gate systems in radiation protection
- Shielding doors and gates (manual or automatic) for radiation protection rooms and radiation protection chambers with:
- Programmable logic controller and frequency converter for smooth start-up, acceleration and gentle deceleration in the end position
- Control-programmed, infinitely adjustable opening and closing cycles for optimum treatment frequency
- Integration of door systems into the operating concept of the complete installation
- Emergency opening system in case of power failure with manual opening device
- Design of the system components for low-wear operation
- Monitoring of the operating states via remote diagnosis
- Assembly, service and regular inspection by experts
2.6 Radiation protection containers (MAW and LAW)
- Tank containers for radioactive liquids
- Special containers for the transport of radioactive liquids
- Approvals according to the highest international safety guidelines for rail and road transport for hazardous material class 7 according to ADR/RID Possible container equipment
- Calculation and design of container and shielding thickness according to the load to be transported
- For PLC-controlled filling, there are the variants vacuum/compressed air or pump systems. The electronic control is integrated in the container.
- Vacuum pumps, compressors or exhaust air filters on-board.
- Additional collecting trays for condensate
- Tank container and fairing coated with decontamination paint
- Tanks with thermal insulation or integrated heating system
- Safety concept with high-security tank and double-walled shell or a steel-lead sandwich shell
- automatic control concept and/or leak detection system.
- Automatic closure of the tank valves in case of malfunctions
- Walk-on platform for service and maintenance work
2.7. Evaporator plants for the treatment of radioactive liquids
- Plants for the treatment of waste water with low radioactive contamination. The principle is based on the separation of the wastewater by a distillation process. Non-volatile substances (salts / solids) - and thus also the bound radioactivity - are retained in the concentrate, while the pure water content is distilled off by purifying the steam produced.
3. Anodes for metal extraction
3.1. Anodes for metal extraction (zinc, copper, nickel)
- Lead-silver anodes (PbAg) for electrolytic zinc recovery
- Lead-calcium anodes (PbCa) for the electrowinning of copper
- Anodes for special applications
- Anode "full-service recycling" - from new and scrap metal by recycling anodes
- Cathodes
- Organisation of the project logistics
- Practical research and application development
- On-site support and assistance with process optimisation
4. Service
4.1 Design & Engineering
- Calculations, material selection and CAD-supported designs
- CAD Tools
- Consideration of all stresses due to mechanical and chemical loads incl. statics and earthquake safety calculations
4.2 On-site service, transport and assembly
- Planning and implementation of heavy load transports by road, rail and waterway
- Assembly teams consisting of site managers, engineers, technicians, locksmiths, lead solderers and welders with certificates of competence and experience from projects worldwide
- Assembly, commissioning, maintenance, repair, general overhaul and dismantling.
- Preparation of inspection reports, as part of the maintenance planning of facilities
- Remote assistance e.g. through augmented reality as support for assembly processes
- Installation, service and regular inspection of door/gate systems by experts
